INtime SDK Help
LNC Function Calls
The following table lists all of the library calls in the LNC.
| To . . . | Use this library call . . . |
|---|---|
| Assign a start address to all local nodes (if using excluded memory). | lncAssignMemory |
| Check if core assignments are correct for the current boot mode. | lncCheckCores |
| Clear the memory and processor restriction in the boot options. | lncClearBootOptions |
| Create a new local node. | lncCreateNode |
| Delete an existing local node. | lncDeleteNode |
| Act upon the current restart value. | lncDoRestart |
| Enumerate local nodes. The order is not determined. | lncEnumNodes |
| Free the space used for parameter names. | lncFreeAllStrings |
| Get the size of a multi-string value. | lncGetMultiStringLength |
| Get the current restart value. | lncGetRestart |
| Miscellaneous parameter settings. | lncMiscSetPar |
| Redetect physical memory. | lncRedetectMemory |
| Rename an existing node. | lncRenameNode |
| Set the restart value. | lncSetRestart |
System parameters apply to the system, including all local nodes
| To . . . | Use this library call . . . |
|---|---|
| Enumerates parameters for a specific INtime node. | IncSysCtlEnumPar |
| Get parameter for a specific INtime node. | IncSysCtlGetPar |
| Edit parameter for a specific INtime node. | IncSysCtlSetPar |
| Delete a parameter from the System section. | lncSysDelPar |
| Enumerate parameters in the System section. | lncSysEnumPars |
| Get the value of a parameter in the System section. | lncSysGetPar |
| Get information about a parameter in the System section. | lncSysGetParInfo |
| Set the value of a parameter in the System section. | lncSysSetPar |
Kernel functions operate on the parameters for one local node. A node name is always required (except for the enumerate and get parameter information functions).
| To . . . | Use this library call . . . |
|---|---|
| Delete a kernel parameter. | lncKerDelPar |
| Enumerate parameters in the Kernel section. | lncKerEnumPars |
| Get the value of a parameter in the Kernel section. | lncKerGetPar |
| Get information about a parameter in the Kernel section. | lncKerGetParInfo |
| Set the value of a parameter in the Kernel section. | lncKerSetPar |
Memory area functions operate on the memory areas for each node.
| To . . . | Use this library call . . . |
|---|---|
| Add a new memory area. | lncKerAddArea |
| Delete a memory area. | lncKerDelArea |
| Enumerate memory areas for node. | lncKerEnumArea |
| Get a memory area parameter. | lncKerGetAreaPar |
| Set a memory area parameter. | lncKerSetAreaPar |
| Save changes to memory areas. | lncKerSaveAreas |
| Discard changes to memory areas. | lncKerResetAreas |
This section describes function for network configuration. Functions that contain ‘Net’ in the name operate on general network parameters and are specific for a node; functions with ‘Nic’ in the name are specific for a NIC on a node.
A node can be configured with one or more NICs; it can also have any number of IPv4 and/or IPv6 routes. A NIC can have any number of IPv4 and/or IPv6 addresses.
Where an element is numbered (such as with routes), the index is zero based: the first element has index zero.
| To . . . | Use this library call . . . |
|---|---|
| Delete a general network parameter. | lncNetDelPar |
| Enumerate parameters in the general Network section. | lncNetEnumPars |
| Get the value of a parameter in the general Network section. | lncNetGetPar |
| Get information about a parameter in the general Network section. | lncNetGetParInfo |
| Remove a NIC from the node’s network. | lncNicDel |
| Enumerate NIC specific parameters. | lncNicEnumPars |
| Enumerate all supported NIC types. | lncNicEnumTypes |
| Get the value of a parameter for a NIC on a node. | lncNicGetPar |
| Get the details of a NIC specific parameter. | lncNicGetParInfo |
| Move a NIC on a node to another place in the list of NICs on that node. | lncNicMove |
| Set a NIC specific parameter on a node. | lncNicSetPar |
| Add an IPv4 route to the node’s network. | lncNetRoute4Add |
| Remove an IPv4 route from the node’s network. | lncNetRoute4Del |
| Set the value of a parameter in the general Network section. | lncNetSetPar |
| Add a NIC to the node’s network. | lncNicAdd |
| Add an IPv4 address to the list of IPv4 addresses of a NIC on the node’s network. | lncNicAddr4Add |
| Remove an IPv4 address from a NIC on the node’s network. | lncNicAddr4Del |
| Get the value of a parameter of an IPv4 address of a NIC on a node. | lncNicAddr4GetPar |
| Move an IPv4 address for a NIC on a node to another place in the list of IPv4 addresses for that NIC. | lncNicAddr4Move |
| Set a parameter for an IPv4 address of a NIC on a node. | lncNicAddr4SetPar |
| Add an IPv6 address to the list of IPv6 addresses of a NIC on the node’s network. | lncNicAddr6Add |
| Remove an IPv6 address from the list of IPv6 addresses of a NIC on the node’s network. | lncNicAddr6Del |
| Get the value of a parameter of an IPv6 address of a NIC on a node. | lncNicAddr6GetPar |
| Move an IPv6 address for a NIC on a node to another place in the list of IPv6 addresses for that NIC. | lncNicAddr6Move |
| Set a parameter for an IPv6 address of a NIC on a node. | lncNicAddr6SetPar |
Advanced sections contain node parameters that do not need to change very often. A number of advanced sections is created at installation time, but advanced sections and parameters in them can be added, modified and deleted at any time.
A section is identified by a name. It can contain zero or more parameters.
A parameter in a section is also identified by a name. It contains a number of properties; the LNCA_VALUE property is always present, the others are optional.
| To . . . | Use this library call . . . |
|---|---|
| Add a parameter to a section in the set of advanced sections. | lncAdvAddPar |
| Add a section to the set of advanced sections. | lncAdvAddSection |
| Delete a parameter from an advanced section. | lncAdvDelPar |
| Delete a property of a parameter from an advanced section. | lncAdvDelProp |
| Delete an advanced section with all its parameters. | lncAdvDelSection |
| Enumerate parameters in an advanced section for a node. | lncAdvEnumPars |
| Enumerate properties that advanced section parameters can have. | lncAdvEnumProps |
| Enumerate advanced sections for a node. | lncAdvEnumSections |
| Get a property of a parameter in an advanced section. | lncAdvGetProp |
| Get the details of a parameter property in an advanced section. | lncAdvGetPropInfo |
| Set a parameter property in an advanced section. | lncAdvSetProp |
Load parameters describe INtime applications that are automatically loaded when the INtime kernel starts on a local node. The list consists of applications (similar to sections), each having a set of parameters. The order of applications in the list is not relevant; if any particular order of starting is required, it must be defined via the dependency parameters. An application is identified by its name.
System applications cannot be deleted; the only parameter that can be changed for a system application is LNCL_ENABLE.
| To . . . | Use this library call . . . |
|---|---|
| Add a new auto-load application. | lncLoadAddApp |
| Delete an auto-load application with all its parameters. | lncLoadDelApp |
| Delete an auto-load application parameter. | lncLoadDelPar |
| Enumerate auto-load applications for a given node. | lncLoadEnumApps |
| Enumerate parameters that an auto-load application can have. | lncLoadEnumPars |
| Get the value of an auto-load application. | lncLoadGetPar |
| Get the details of an auto-load application parameter. | lncLoadGetParInfo |
| Set a parameter of an auto-load application. | lncLoadSetPar |
These functions are provided for backward compatibility, but should be avoided in new developments. They only cover system and kernel parameters.
Delete Parameter Delete Section Enumerate parameters Enumerate sections Get Parameter DWORD Get Parameter Information Get Parameter Multi String Get Parameter String Set Parameter DWORD Set Parameter Multi String Set Parameter String