INtime SDK Help
UsbInterruptXfer
INtime SDK v6 > About INtime > Networking and I/O > USB > USB calls > UsbInterruptXfer

Perform a synchronous interrupt transfer.


int32_t UsbInterruptXfer(
int32_t udev,
uint32_t pipe,
void *data,
uint32_t len,
uint32_t * actual_length,
uint32_t flags,
uint32_t interval,
uint32_t timeout
);

Parameters

udev
Device handle from UsbOpenDevice.
pipe
Value describing the device, endpoint number, type, and transfer direction.
data
User data buffer.
len
Length in bytes of expected transfer.
actual_length
Pointer to a location which receives the count of actual bytes transfered.
flags
Transfer flags. One of the following:
USB_FORCE_SHORT_XFER - force a short transmit last
USB_SHORT_XFER_OK - allow short reads
USB_DELAY_STATUS_STAGE - insert delay before STATUS
USB_MULTI_SHORT_OK - allow multiple short frames
interval
The interval defined in the interrupt endpoint descriptor
timeout
Timeout in milliseconds for the transfer. Use USB_WAIT_FOREVER to wait forever.

Return Values

USB_ERR_NORMAL_COMPLETION Success. The operation was completed.
USB_ERR_NO_STACK The USB stack is not ready.
USB_ERR_MEMORY Memory could not be allocated for the operation.
USB_ERR_TIMEOUT The device did not respond.

Requirements

Versions Defined in Include Link to
INtime 5.0 intime/rt/include/usbif3h usbif3h usbif3lib